Browsing by Author "Rocha, F."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
- Exploring the potential of cuttlebone waste to produce building limePublication . Ferraz, Eduardo; Gamelas, J. A.F.; Coroado, João; Monteiro, C.; Rocha, F.The goal of this study is to find a practicable way to recycle cuttlebone waste in the production of lime. It was studied the behavior of calcium oxide obtained from the calcination of this waste at 900, 1000 and 1100 ºC and, after wet slaking, the produced lime was characterized. All the results were compared to calcium oxide or to hydrated lime obtained from commercial limestone. According to the slaking results, the waste and the limestone calcined at 1000 ºC achieved the R4 (around 13 min to reach 60 ºC) and R5 (60 ºC in 25 s) reactivity class, respectively. Changing the calcination temperature to 900 or 1100 ºC did not promote an increase in the reactivity of the calcined waste. Although less reactive than the calcined limestone, the calcined cuttlebone can be transformed without significant constraint into building lime, since this construction material fulfills the relevant physic-chemical standard specifications.
- Synchrotron X-ray diffraction of bole layers from Portuguese gilded baroque retablesPublication . Barata, C.; Rocha, F.; Cruz, António João; Andrejkovicová, S.; Reguer, S.Studies based on a scientific approach to materials and techniques used in Portuguese gilded retables from the Baroque are very scarce and focus particularly on works with erudite features and on the characterization of the superficial gold leaf. The conservation and appearance of gilded surfaces, however, depended on the qualities of the clayey ground layer underneath, which is the bole. Colour and texture are closely related to its mineralogical composition. Boles were healing clays. Red to orange varieties could also be used for gilding, usually agglutinated with animal glue when the gold surface was meant to be burnished. Armenian was the name used to identify the best quality material. Microsamples collected from erudite and popular gilded retables, respectively belonging to the city of Oporto and its rural surroundings, were selected for elemental and mineralogical characterization. It was intended to shed light on the characteristics of boles used in Portuguese retables and to understand if there are any differences between materials used in works of distinct artistic quality. Elemental analysis was performed through SEM–EDS. SR-XRD was used for phase identification, performed with a six-circle diffractometer at the DIFFABS beamline of SOLEIL Synchrotron. Portuguese clay standards of identifiable composition and provenance were also analysed. The results suggest that boles are mainly kaolinitic, with variable amounts of illite and smectite. Gypsum was used as an extender. Although the proportions of the main clay minerals are similar in erudite and popular works, in Oporto homogeneity is clearly higher.